31. Your CD-ROM audio cable connects to the:
A. speaker
B. sound card (or motherboard if sound is integrated with it)
C. power supply
D. hard drive
E. BIOS
32. In the Binary numbering system, a (1) represents a jumper being shorted and a (0) represents a jumper being open. On a three-bit jumper block on a SCSI drive, how would an ID of logical 3 be set?
A. 100
B. 010
C. 011
D. . 101
E. None of the above
33. After installing a sound card, the system locks up when a parallel port tape backup unit is also used. What is most likely the problem?
A. IRQ
B. DMA
C. defective LPT port
D. defective tape driver
E. defective sound card.
34. You are testing the resistance in Ohms of a fuse on a 15K amp system. If the fuse is good, the meter should read?
A. 0.0
B. 0.2
C. 5.0
D. 2.0
E. None of the above
35. Type one PC cards:
A. are used only in desktops
B. are no longer being produced
C. are the thinnest of the PC cards
D. don’t exist
E. have their own power source